Unitree G1 and Go2 robots on a trade show stand (Japan Mobility Show 2025)
Knowledge base

Humanoid robot at automatica in Munich: role on the stand, visitors and Messe München rules

automatica 2027 in Munich (22-25 June): who the visitors are, what a humanoid robot does on a stand, which rules Messe München applies and how to prepare.

MERA Robotics teamUpdated: 2 November 20266 min readDeutsche VersionWersja polska

photo: RuinDig/Yuki Uchida, CC BY 4.0
In short

At automatica a humanoid robot makes a stand stand out when it has a job: it talks to engineers about the exhibitor's offer in their language, recognises exhibits and hands interested visitors to sales. The next edition runs in Munich from 22 to 25 June 2027. A demonstration needs Messe München's approval, noise at the stand perimeter may not exceed 70 dB(A), and guests must know they are talking to an AI.

ContentsWhat is automatica and when is the next edition?Why put a humanoid robot on a stand when there are over a thousand robots?How does the robot talk to engineers from different countries?Which Messe München rules apply to a robot on the stand?How do you prepare a robot for automatica 2027?How to choose a contractor for a trade fair robot in Munich?

What is automatica and when is the next edition?

automatica is the trade fair for automation and robotics held in Munich every two years. The next edition runs from 22 to 25 June 2027 at Messe München (East Entrance, where all the automation halls are), alongside Laser World of Photonics and World of Quantum. For exhibitors the halls open from 7:30 to 19:00 (to 17:00 on Friday), for visitors from 9:00 to 17:00 (to 16:00 on Friday).

According to the organiser, around 49,300 people from more than 90 countries visited in 2025, and about 800 companies from 40 countries exhibited. More than 1,100 robots were shown across six halls. International visitors made up 38 percent, and Poland is among the ten countries with the most visitors after Germany. Decision-makers account for 83 percent of visitors, and most guests come from research and development (26 percent) and production and planning (24 percent).

Why put a humanoid robot on a stand when there are over a thousand robots?

At automatica the fact that a humanoid robot walks no longer sets a stand apart: in 2025 Neura Robotics presented a new generation of its humanoid there, and the organiser speaks of 1,120 robots on display. A robot gets noticed when it has a job at the stand. Visitors are largely engineers and managers, so the conversation has to be factual.

Role What the robot does What to watch
Conversation partner at the entrance greets guests, asks what they are looking for, points them to sales short technical answers without generalities
Guide to the offer explains products and applications in the guest's language knowledge matching the data sheets
Recognising exhibits recognises a product through the camera and talks about it fixed position of the display, good light
Stage and panel introduces a presentation or talks with a company expert rehearsal with the sound system
Media content records clips with guests and the stand team consent for publishing people's image

How does the robot talk to engineers from different countries?

With 38 percent of guests coming from abroad, the full list of languages counts, not English alone. As an example of how this works in practice: The conversations run on MERA OS, the conversation system MERA Robotics built for humanoid robots, in more than 70 languages and with a voice matched to each language. A MERA robot can have its own brand identity (a name, a character, a way of speaking and knowledge of the exhibitor's offer) and can recognise objects through its camera, for example a product model on display, and talk about it. The statements are prepared for the specific fair, in a profile with knowledge about the client and the programme. Before the event the client agrees with MERA on the tone, vocabulary and topics the robot does not touch, and a MERA operator supervises the conversations and can stop the robot at any moment.

Which Messe München rules apply to a robot on the stand?

The technical guidelines of Messe München (edition of February 2025, attached to the documents of The smarter E Europe) show what to expect on the Munich fairgrounds. The document for automatica may differ, so download the current version from the exhibitor portal. According to these guidelines:

  • Approval. Every kind of performance and presentation, and any moving or acoustic advertising, needs the prior written approval of Messe München.
  • Noise. The noise level at the stand perimeter may not exceed 70 dB(A), and the organiser may restrict or prohibit a performance even after approval if it disturbs the fair.
  • Stand perimeter. Moving advertising on the stand perimeter is prohibited, so the robot works inside the stand footprint, not in the aisle.

For equipment with a CE mark, the manufacturer's declaration of conformity is useful. Regulation (EU) 2023/1230 on machinery, which replaces the Machinery Directive, applies from 20 January 2027, before the June fair, so it is worth checking the robot's documents with its manufacturer. The robot's conversations with guests also fall under the AI Act, which according to the European Commission entered into force on 1 August 2024 and became applicable on 2 August 2026, with some exceptions. Article 50 requires that people talking to an AI system are informed of it unless this is obvious. The robot can simply say that it is an AI system.

How do you prepare a robot for automatica 2027?

  1. Role. Decide whether the robot should stop visitors, talk about the offer or perform on stage.
  2. Knowledge. Prepare product descriptions, technical questions and the topics the robot hands over to sales.
  3. Languages. Check the robot's language list and match it to guests from the countries that visit the fair most.
  4. Zone. Set aside space for the robot and charging, away from running machinery, inside the stand footprint.
  5. Notifications. Agree the demonstration in writing with the organiser and prepare the robot's documents.
  6. Connection. Live conversations need a stable internet link, so order a line or agree your own solution.
  7. Operation. Arrange passes for the operators and constant supervision of the robot.
  8. Rehearsal. Test the conversations in the noise of the hall and the recognition of exhibits in the light of the stand.

MERA Robotics rents Unitree G1 and Unitree H2 humanoid robots with its own operators, who bring the robot and run it on site. MERA Robotics runs events across Europe: the robot arrives with MERA operators in every country of the European Union, and in September 2026 it worked at an international trade fair in Cannes. Overview of models: humanoid robot catalogue and robots for rent and sale. More on other fairs for automation: humanoid robot at automatica, HANNOVER MESSE and ITM.

How to choose a contractor for a trade fair robot in Munich?

A contractor is best judged by a few checkable criteria:

  • Operator on site. The operator stays with the robot the whole time and can stop it immediately.
  • Live conversation and languages. The robot holds a real conversation, and the contractor gives a concrete list of languages.
  • Programme and knowledge of the stand. The robot knows the exhibitor's offer, and forbidden topics are agreed before the fair.
  • Brand identity. The robot's name, way of speaking and look fit the exhibitor's brand.
  • Operating range. The contractor can bring the robot to Germany and handle the formalities abroad.
  • Verifiable references. Described events, media coverage or references that can be checked.

Frequently asked questions

When is the next automatica?

According to the organiser the next automatica takes place in Munich from 22 to 25 June 2027. The fair is held every two years.

Will a humanoid robot make a stand stand out at automatica?

Movement alone is not enough, because over a thousand robots were shown in 2025, including a new generation of a humanoid from Neura Robotics. A robot with a task stands out: talking about the offer in the guest's language, recognising exhibits and handing interested visitors to sales.

How loud may a robot be on a stand at Messe München?

According to the Messe München technical guidelines noise at the stand perimeter may not exceed 70 dB(A), and demonstrations need prior written approval. The current rules for automatica are in the organiser's exhibitor documents.

Can the robot walk in the aisle in front of the stand?

It should not. The Messe München guidelines prohibit moving advertising on the stand perimeter, and the organiser may restrict a demonstration despite earlier approval if it causes disturbance. The robot works inside the stand footprint.

Do you have to tell guests they are talking to an AI?

Article 50 of the AI Act requires that people interacting with an AI system are informed of it, unless this is obvious. The simplest approach is for the robot to tell guests itself that it is an AI system.

Sources

  1. automatica 2025: Final report (Messe München)
  2. automatica 2027: Opening hours (Messe München)
  3. Facts and figures about automatica (Messe München)
  4. Messe München: Technical Guidelines (as of 02/2025)
  5. SPS 2026: Stand construction guidelines, technical guidelines and important information (NürnbergMesse)
  6. European Commission: Regulatory framework on AI
  7. AI Act, Article 50: Transparency Obligations for Providers and Deployers of Certain AI Systems
  8. Regulation 2023/1230/EU - machinery (EU-OSHA)
About the publisher

Who publishes this page

This page is published by MERA Robotics, a company that rents humanoid robots with operators for events.

Our range

Robots for rent and sale

Full robot catalogue →

Contact

Let's talk about your event

Tell us briefly what you need. We will reply with a proposed robot, scenario and quote.

We use the form data only to reply to your enquiry.

Knowledge base

Keep reading

Check availability